Minimum Version Required:
2.4.0 (IPO R9 2.6.10 27053 R10 requires 2.6.12) - R11 not tested
To perform an installation you will need the IP address of the PBX.
System password is required (This is different from the administrator password)
Monitor password is also required.
Calls to groups are not shown correctly.
Handsets do not show as unplugged, (although they work again after being reconnected).
Reconnection, Following a PBX restart the ucplus Server will take several minutes before the PBX will allow it.
Phone function key transfers do not support CLI sending.
To receive DDI (DID) you need to configure a call Tag in the incoming call route.
A CTI Link Pro license is required
UDP: 161 (SNMP)
The Avaya IP Office connects onto the LAN via the RJ45 socket on the front of the PBX. The local IP address and other network settings are set through the Manager software.
Firmware Requirements (for new installations):
4 or later
The unit's security policy needs to have TAPI enabled
|WAN Connectivity||Trunk Monitoring||Analog Phones Supported||Agent Features Supported|