Nortel BCM
ucplus Server Information
Minimum Version Required:
2.4.0
Installation Notes:
To perform an installation you will need the IP address of the PBX.
Directory Download:
Extensions, Trunks
Advisories:
When deflecting a call, the call continues ringing at your extension as well as at the deflection target.
The PBX does not natively support completing a consultation transfer while the consultation is in the ringing state. Instead, ucplus Server simulates this functionality by cancelling the consultation and performing a single-step blind transfer.
*This PBX is end of life by Nortel.
Connection Information
Type:
Proprietary (LAN CTE)
Requirements:
Dedicated LAN CTE Dedicated LAN CTE license (One)
Firewall Requirements:
TCP: 1222
PBX Information
Architecture:
The Nortel BCM connects to the LAN via the socket on the front of the PBX. The local IP address and other network settings are set through the Nortel Business Element Manager software, which is downloaded from the PBX.
Driver Requirements:
Included
Firmware Requirements (for new installations):
BCM 200 & 400: Release 4.0
BCM 50: Release 2
BCM 450: Release 1
| Type | Make Call | Hang up | Answer | Deflect | Blind Transfer | Supervised Transfer | Hold | Pick up | Send DTMF | Call Fwd | Dialback |
|---|