Minimum Version Required:
2.5.32
Installation Notes:
To perform an installation you will need the IP address of the PBX.
Directory Download:
Extensions, Trunks
Advisories:
Only one application can connect to the TAPI interface at a time. If another computer is connected, then the connection will fail.
SP310 softphones have not been fully tested but should provide some call control. Only 1 device supported.
If using hotdesking enable CTI Override Mode in Prg 15-05-39
NEC TAPI mode connection - DND not supported.
NEC TAPI mode connection - Call Forward not supported.
Type:
TAPI
Requirements:
3rd Party TAPI license
Firewall Requirements:
TCP: 8181 (default)
Architecture:
The NEC SV9100 connects directly onto the LAN through the connector on the CPU card. The local IP address and other network settings are set through either the Administration program or the HTML-based programming interface.
Driver Requirements:
Included
Firmware Requirements (for new installations):
Version 7 tested
Other Requirements:
A 60 day trial TAPI license may be available
Type | Make Call | Hang up | Answer | Deflect | Blind Transfer | Supervised Transfer | Hold | Pick up | Send DTMF | Call Fwd | Dialback |
---|---|---|---|---|---|---|---|---|---|---|---|
NEC Handset | |||||||||||
NEC Softphone |